So when configuring a Port Forward on a Zyxel USG40 I seem to be missing something despite following the Guide that is available in the interface and despite having done some troubleshooting to find out what is wrong. As part of this I do of course check the logs, I should specifically check for MESSAGE log entries according to this:
Select “DNS Relay” to have the EMG act as a DNS proxy. The EMG will use the ISP provided DNS servers to forward queries to. Select “User-Defined” to manually enter the DNS server address you wish to use. Select “NONE” if you do not wish to configure the DNS entry. Click Apply to save the settings. Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly andA telephone connected to the phone port has its receiver off the hook or there is an incoming call. There is no voice message in the corresponding SIP account. Amber: On: A SIP account is registered for the phone port and there is a voice message in the corresponding SIP account. Blinking
5. No; When you forward a port you send all traffic to a single address. If you need 2 devices to receive the data on the same port then you need to forward it to a single device that connects those 2 additional devices to the network ( say another router for instance ). – Ramhound. Feb 5, 2015 at 12:21.
The basic process to open a port is: Setup a static IP address on either your computer or device that you want to forward a port to. Login to your ZyXEL ZyWALL Z 70 UTM router. Navigate to the port forwarding section. Click the SUA/NAT link. Create a port forward entry. Ls7j9kj.